🎉 Up to 70% Off Selected ItemsShop Sale
Stage 3.5 Boost Cooler Water Methanol Injection Kit <br> Universal Fit
Description:
The Snow Performance Stage 3.5 Boost Cooler delivers true 2D-mapped water-methanol injection to your DI (direct-injected) and forced-induction (turbocharged/supercharged) vehicle. The Stage 3.5 creates a 2D injection map based on boost and fuel pressure sensor input to deliver a highly accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling. The VC-100 controller offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a bright 7-color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, and prime button. You can tailor the controller color to match your OEM gauges or mix and match up to two colors! This kit utilizes the only OEM-approved water-methanol injection pump on the market with a proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to withstand the elements, with O-Ring connections sealed and potted to prevent moisture from entering the pump internals. Compare this to pumps that use a pump insleevein. These sleeves will trap moisture around the pump unit, leading to corrosion, and will greatly trap heat, greatly decreasing pump life. The Stage 3.5 comes standard with 100% methanol-resistant components, including stainless steel, nickel plating, EPDM, and hard anodizing, to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak-free operation even when using 100% methanol. Whether running a supercharger, turbo, or high-compression motor, the Stage 3.5 Boost Cooler will make the induction charge colder and denser, increasing 91-octane fuel to 116-octane race gas levels, allowing full power all the time!
Package Includes:
Water/Meth Inject Kit - SNO-325-T
The Snow Performance Stage 3.5 Boost Cooler delivers true 2D-mapped water-methanol injection to your DI (direct-injected) and forced-induction (turbocharged/supercharged) vehicle. The Stage 3.5 creates a 2D injection map based on boost and fuel pressure sensor input to deliver a highly accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling. The VC-100 controller offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a bright 7-color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, and prime button. You can tailor the controller color to match your OEM gauges or mix and match up to two colors! This kit utilizes the only OEM-approved water-methanol injection pump on the market with a proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to withstand the elements, with O-Ring connections sealed and potted to prevent moisture from entering the pump internals. Compare this to pumps that use a pump insleevein. These sleeves will trap moisture around the pump unit, leading to corrosion, and will greatly trap heat, greatly decreasing pump life. The Stage 3.5 comes standard with 100% methanol-resistant components, including stainless steel, nickel plating, EPDM, and hard anodizing, to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak-free operation even when using 100% methanol. Whether running a supercharger, turbo, or high-compression motor, the Stage 3.5 Boost Cooler will make the induction charge colder and denser, increasing 91-octane fuel to 116-octane race gas levels, allowing full power all the time!
Package Includes:
$834.16
Stage 3.5 Boost Cooler Water Methanol Injection Kit <br> Universal Fit—
$834.16
Description
Description:
The Snow Performance Stage 3.5 Boost Cooler delivers true 2D-mapped water-methanol injection to your DI (direct-injected) and forced-induction (turbocharged/supercharged) vehicle. The Stage 3.5 creates a 2D injection map based on boost and fuel pressure sensor input to deliver a highly accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling. The VC-100 controller offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a bright 7-color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, and prime button. You can tailor the controller color to match your OEM gauges or mix and match up to two colors! This kit utilizes the only OEM-approved water-methanol injection pump on the market with a proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to withstand the elements, with O-Ring connections sealed and potted to prevent moisture from entering the pump internals. Compare this to pumps that use a pump insleevein. These sleeves will trap moisture around the pump unit, leading to corrosion, and will greatly trap heat, greatly decreasing pump life. The Stage 3.5 comes standard with 100% methanol-resistant components, including stainless steel, nickel plating, EPDM, and hard anodizing, to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak-free operation even when using 100% methanol. Whether running a supercharger, turbo, or high-compression motor, the Stage 3.5 Boost Cooler will make the induction charge colder and denser, increasing 91-octane fuel to 116-octane race gas levels, allowing full power all the time!
Package Includes:
Water/Meth Inject Kit - SNO-325-T
The Snow Performance Stage 3.5 Boost Cooler delivers true 2D-mapped water-methanol injection to your DI (direct-injected) and forced-induction (turbocharged/supercharged) vehicle. The Stage 3.5 creates a 2D injection map based on boost and fuel pressure sensor input to deliver a highly accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling. The VC-100 controller offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a bright 7-color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, and prime button. You can tailor the controller color to match your OEM gauges or mix and match up to two colors! This kit utilizes the only OEM-approved water-methanol injection pump on the market with a proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to withstand the elements, with O-Ring connections sealed and potted to prevent moisture from entering the pump internals. Compare this to pumps that use a pump insleevein. These sleeves will trap moisture around the pump unit, leading to corrosion, and will greatly trap heat, greatly decreasing pump life. The Stage 3.5 comes standard with 100% methanol-resistant components, including stainless steel, nickel plating, EPDM, and hard anodizing, to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak-free operation even when using 100% methanol. Whether running a supercharger, turbo, or high-compression motor, the Stage 3.5 Boost Cooler will make the induction charge colder and denser, increasing 91-octane fuel to 116-octane race gas levels, allowing full power all the time!
Package Includes:
